Equipment Description

It mainly consists of timer, counter, sensor, speed regulating motor, driving cot, synchronous pulley and other components. Dimension is in 700(L)*600(W)*500(H)mm(Outer dimensions will vary).

Equipment Function

1. Set corotation and inversion time to run alternately.

2. The running speed can be adjusted, and the speed range is 0-100 meter/min.

3. The running time and times of positive and negative inversion can be preset.

4. The operation of the drive shaft is divided into automatic and manual operation. The number of operating cycles can be preset manually, and the setting of positive and negative operation can be referred to automatically.

5. The rotation angle of the material can be adjusted by itself, and the adjustment range is 0-360 degrees. 

6. Automatic shutdown after material disconnection;

7. Material tension is shown in digital display and the tension range is 0 ~ 20KG; Easy operation.

8. Anti-static rollers with different diameters can be provided according to customer´s requirements.

9. Applicable to all material widths currently provided by domestic suppliers.

10. Material orientation can be set freely by one active axis and six driven axles.

Main Achievement

1.Testing the surface strength of composite PET with aluminium thin etching antenna;

2. firm strength of the chip paste and the number of bending resistance of Inlay.

3.Make Inlay into finished product by secondary packaging, and test bending test according to different environment.