JX-JGP-7508 RFID electronic tag antenna laser proofing machine is developed by using advanced fiber laser, which is suitable for engraving and proofing of copper and aluminum antennas in RFID industry.


 The specifications of the equipment are as follows:
1. Laser: advanced 20W laser;
2. Galvanometer system: advanced galvanometer system;
3. Laser wavelength: 1064nm;
4. Marking range: 120mm X 120mm;
5. Minimum laser line width: 0.01mm;
6. Maximum marking speed: 7000mm/s;
7. The best resolution: 0.001mm;
8. Repeated positioning accuracy: 0.003mm;
9. System power supply: 1KW/AC220V/50HZ.

The technical performance is as follows:
1. Using advanced fiber laser combined with high-speed scanning galvanometer system to achieve marking;
2. The laser has its own optical isolator;
3. High electro-optical conversion efficiency, up to 30%;
4. Air cooling is adopted, the device is small in size, and the output beam quality is good;
5. High pulse repetition frequency and stable output power;
6. High reliability and long service life;
7. Metals (including rare metals) and some non-metals can be marked, such as nylon, light-transmitting keys, plastic, ABS, PVC;
8. Suitable for RFID electronic tag UHF antenna proofing;
9. The equipment is equipped with a smoke purification system, which can absorb the dust generated during laser marking.